dmesg - Cachenbench test on CT
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.75-sun7i (root@ubtu) (gcc version 4.8.2 20130603 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.06 - Linaro GCC 2013.06) ) #36 SMP PREEMPT Mon Feb 10 02:47:28 CST 2014
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
Memory cut off:
MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
Ignoring unrecognised tag 0x00000000
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
G2D : 0x49000000 - 0x49ffffff ( 16 MB)
LCD : 0x5a000000 - 0x5aafffff ( 11 MB)
Memory policy: ECC disabled, Data cache writealloc
sunxi: Allwinner A20 (AW1651/sun7i) detected.
On node 0 totalpages: 507904
free_area_init_node: node 0, pgdat c0b2da80, node_mem_map d0000000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 1008 pages used for memmap
Normal zone: 111632 pages, LIFO batch:31
HighMem zone: 2576 pages used for memmap
HighMem zone: 327152 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @d100e000 s7616 r8192 d12864 u32768
pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503808
Kernel command line: console=tty0 root=/dev/mmcblk0p1 rootwait loglevel=8 panic=10 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x800p60 panic=10 consoleblank=0 fb0_framebuffer_num=3 sunxi_fb_mem_reserve=11
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 448MB 1536MB = 1984MB total
Memory: 1887664k/1887664k available, 143952k reserved, 1318912K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0a78174 (10689 kB)
.init : 0xc0a79000 - 0xc0ab7dc0 ( 252 kB)
.data : 0xc0ab8000 - 0xc0b365b8 ( 506 kB)
.bss : 0xc0b365dc - 0xc0d1eed8 (1955 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:192
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x40786a60 - 0x40786ab8
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3824.02 BogoMIPS).
devtmpfs: initialized
xor: measuring software checksum speed
arm4regs : 1332.000 MB/sec
8regs : 705.600 MB/sec
32regs : 798.000 MB/sec
xor: using function: arm4regs (1332.000 MB/sec)
dummy:
NET: Registered protocol family 16
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab at 0
raid6: int32x1 151 MB/s
raid6: int32x2 189 MB/s
raid6: int32x4 208 MB/s
raid6: int32x8 196 MB/s
raid6: using algorithm int32x4 (208 MB/s)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
WRN:L287(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
WRN:L426(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
WRN:L480(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pm: select wifi: ap6210
ap6xxx: config 32k clock
[wifi_pm]: wifi gpio init is OK !!
[rfkill]: rfkill set power 0
audit: initializing netlink socket (disabled)
type=2000 audit(1.350:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
msgmni has been set to 1110
alg: comp: Compression test 1 failed for lzo-generic: output len = 57
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
[uart]: used uart info.: 0x05
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
[uart]: serial probe 2 irq 35 mapbase 0x01c28800
sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
G2D: head:c9000000,tail:ca000000
G2D: Module initialized.major:250
brd: module loaded
loop: module loaded
[NAND] nand driver version: 0x2 0x9
Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
Dev Sunxi softw311 nand magic does not match for MBR 2:
Dev Sunxi softw311 nand magic does not match for MBR 3:
Dev Sunxi softw311 nand magic does not match for MBR 4:
Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
Dev Sunxi softw411 nand: part 1, start 32768, size 32768
Dev Sunxi softw411 nand: part 2, start 65536, size 32768
Dev Sunxi softw411 nand: part 3, start 98304, size 32768
Dev Sunxi softw411 nand: part 4, start 131072, size 1048576
Dev Sunxi softw411 nand: part 5, start 1179648, size 1048576
Dev Sunxi softw411 nand: part 6, start 2228224, size 32768
Dev Sunxi softw411 nand: part 7, start 2260992, size 65536
Dev Sunxi softw411 nand: part 8, start 2326528, size 655360
Dev Sunxi softw411 nand: part 9, start 2981888, size 32768
Dev Sunxi softw411 nand: part 10, start 3014656, size 524288
Dev Sunxi softw411 nand: part 11, start 3538944, size 11501568
nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
emac_init fetch emac using configuration failed
emac driver is disabled
gmac: use mac address from chipid
eth%d: device MAC address 02:01:02:82:6a:5c
[gmac]: sun6i_gmac platform driver registration completed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
ehci_irq: port change detect
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
ata1: SATA link down (SStatus 0 SControl 300)
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
ehci_irq: port change detect
sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
The port change to OHCI now!
sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
ehci_irq: port change detect
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usb 2-1: new low-speed USB device number 2 using sw-ohci
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
ehci_irq: port change detect
The port change to OHCI now!
mousedev: PS/2 mouse device common for all mice
sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
config i2c gpio with gpio_config api
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[AXP]axp driver uning configuration failed(342)
[AXP]power_start = 0
I2C: i2c-0: AW16XX I2C adapter
lirc_dev: IR Remote Control driver registered, major 249
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
[cedar dev]: install start!!!
[cedar dev]: install end!!!
[tt]----- avs_dev driver load... ----
[tt]----- register iomem ----
Cannot reserve region for ccmu
[tt]--- avs_dev driver load ok!! -----
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 3300 mV at 3000 mV
axp20_ldo3: 700 3500 mV at 2800 mV
axp20_ldo4: 1250 3300 mV at 2800 mV
axp20_buck2: 700 2275 mV at 1450 mV
axp20_buck3: 700 3500 mV at 1300 mV
axp20_ldoio0: 1800 3300 mV at 2800 mV
usb 4-1: new full-speed USB device number 2 using sw-ohci
input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
axp20_ldo2: Failed to create debugfs directory
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
device-mapper: dm-log-userspace: version 1.1.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver ushc
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 Probe: base:0xf00e2000 irq:64 sg_cpu:ffddc000(4fc00000) ret 0.
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 Probe: base:0xf00e4000 irq:67 sg_cpu:ffddb000(4fc01000) ret 0.
[mmc_pm]: failed to fetch sdio card configuration!
sunxi_leds driver init
Registered led device: green:ph20:led1
Registered led device: blue:ph21:led2
ledtrig-cpu: registered to indicate activity on CPUs
input: Logitech USB Optical Mouse as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input1
generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-sw-ohci-1/input0
input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:03F0:1024.0002: input,hidraw1: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-sw-ohci-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
[mmc_pm]: No sdio card, please check your config !!
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
axp20_buck2: Failed to create debugfs directory
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
registered taskstats version 1
[DISP] Unsupported mode: 1280x800p60, ignoring
I2C: i2c-1: HDMI I2C adapter
ParseEDID
EDID version: 1.3
PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
fbdev: 1920x1200 needs 18432000 bytes, but only 11534336 avail.
Reserved SVD code 102
Unimplemented SVD code 12
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 72650000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 193250000 pclk
fbdev: 1600x1200 needs 15360000 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 67150000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
fbdev: 1920x1200 needs 18432000 bytes, but only 11534336 avail.
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 1 support
Parse_VideoData_Block: VIC 5 (native) support
Parse_VideoData_Block: VIC 7 support
Find HDMI Vendor Specific DataBlock
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
Using above mode as preferred EDID mode
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[mmc-msg] mmc 0 detect change, present 1
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=25180000 X 640 648 744 800 Y 480 482 484 525 fr 59 NN
asoc: sndhdmi sunxi-hdmiaudio.0 mapping ok
waited 0 ms for EDID info
disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 power on
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set round clock 400000, src 24000000
Console: switching to colour frame buffer device 160x45
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
[mmc-err] smc 0 err, cmd 5, RTO
axp20_ldo4: incomplete constraints, leaving on
[mmc-err] smc 0 err, cmd 5, RTO
axp20_ldo3: incomplete constraints, leaving on
[mmc-err] smc 0 err, cmd 5, RTO
axp20_ldo2: incomplete constraints, leaving on
[mmc-err] smc 0 err, cmd 5, RTO
axp20_ldo1: incomplete constraints, leaving on
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
ALSA device list:
#0: sunxi-CODEC Audio Codec
#1: sunxi-sndhdmi
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
Waiting for root device /dev/mmcblk0p1...
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set round clock 42857143, src 600000000
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD08G 7.42 GiB
mmcblk0: p1
EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
Freeing init memory: 248K
udevd[178]: starting version 175
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
sunxi_gpio driver init ver 1.3
gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
UMP: Inserting UMP device driver. Compiled: Jan 19 2014, time: 02:28:09
UMP: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x5A000000, size=11534336)
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
mali: use config clk_div 1
mali: clk_div 1
Mali: mali clock set completed, clock is 312000000 Hz
Mali: Mali device driver loaded
bcmdhd: got gpio2, mapped to irqno170
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
sdio wifi power state: on
[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 power on
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
=========== WLAN placed in POWER ON ========
[mmc-err] smc 3 err, cmd 52, RTO
[mmc-err] smc 3 err, cmd 52, RTO
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-err] smc 3 err, cmd 8, RTO
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: new high speed SDIO card at address 0001
Linux Kernel SDIO/MMC Driver
bcmdhd: irq=170, flags=0x00000414
dhdsdio_probe : no mutex held. set lock
F1 signature read @0x18000000=0x1591a962
bcmsdh_config_hw_oob_intr: Enter
DHD: dongle ram size is set to 245760(orig 245760)
dhd_attach, firmware path
wl_create_event_handler thr:2ba created
wl_create_event_handler thr:2ba started
p2p0: P2P Interface Registered
dhd_attach thr:2bb created
dhd_attach thr:2bb started
dhd_attach thr:2bc created
bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
dhd_attach thr:2bc started
dhd_attach thr:2bd created
dhd_attach thr:2bd started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
dhdsdio_probe : the lock is released.
Dongle Host Driver, version 1.28.23.3 (r)
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
sdio wifi power state: off
=========== WLAN placed in RESET ========
sunxi_gmac: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
dhd_open, firmware path
Dongle Host Driver, version 1.28.23.3 (r)
wl_android_wifi_on in
dhd_customer_gpio_wlan_ctrl: callc customer specific GPIO to remove WLAN RESET
sdio wifi power state: on
=========== WLAN going back to live ========
sdio_reset_comm():
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[mmc-msg] sdc3 set round clock 42857143, src 600000000
[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
dhd_bus_devreset: == WLAN ON ==
dhd_bus_devreset called when dongle is not in reset
Will call dhd_bus_start instead
bcmsdh_config_hw_oob_intr: Enter
dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_set_drvdata Enter
bcmsdh_register_oob_intr Enter
bcmsdh_register_oob_intr IRQ=170 Type=414
dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=98:3b:16:5a:89:c1
Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Driver: 1.28.23.3 (r)
Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
wl_android_wifi_on: Success
CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=9a:3b:16:5a:89:c1
PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
Warning: this sunxi disp driver will see significant redesign.
Applications using /dev/disp directly will break.
For more information visit:
[DISP] layer allocated: 0,101
bcmsdh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65535)
CFG80211-ERROR) wl_notify_scan_status : scan is not ready
ParseEDID
EDID version: 1.3
PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
Reserved SVD code 102
Unimplemented SVD code 12
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 72650000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 193250000 pclk
fbdev: 1600x1200 needs 15360000 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 67150000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
fbdev: 1920x1200 needs 18432000 bytes, but only 11534336 avail.
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 1 support
Parse_VideoData_Block: VIC 5 (native) support
Parse_VideoData_Block: VIC 7 support
Find HDMI Vendor Specific DataBlock
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=25180000 X 640 648 744 800 Y 480 482 484 525 fr 59 NN
EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (nandj): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 16427
EXT4-fs (nande): 1 orphan inode deleted
EXT4-fs (nande): recovery complete
EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1: USB disconnect, device number 2
ehci_irq: port change detect
usb 3-1: new high-speed USB device number 3 using sw-ehci
scsi1 : usb-storage 3-1:1.0
scsi 1:0:0:0: Direct-Access USB2.0 FlashDisk 0.00 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 1:0:0:0: [sda] Asking for cache data failed
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Asking for cache data failed
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda:
sd 1:0:0:0: [sda] Asking for cache data failed
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
ehci_irq: port change detect
usb 3-1: USB disconnect, device number 3
ehci_irq: port change detect
ehci_irq: port change detect
The port change to OHCI now!
usb 4-1: new full-speed USB device number 3 using sw-ohci
input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:03F0:1024.0003: input,hidraw1: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-sw-ohci-1/input0
ParseEDID
EDID version: 1.3
PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
Reserved SVD code 102
Unimplemented SVD code 12
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 72650000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 193250000 pclk
fbdev: 1600x1200 needs 15360000 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 67150000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
fbdev: 1920x1200 needs 18432000 bytes, but only 11534336 avail.
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 1 support
Parse_VideoData_Block: VIC 5 (native) support
Parse_VideoData_Block: VIC 7 support
Find HDMI Vendor Specific DataBlock
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=25180000 X 640 648 744 800 Y 480 482 484 525 fr 59 NN
usb 2-1: USB disconnect, device number 2
usb 4-1: USB disconnect, device number 3
ParseEDID
EDID version: 1.3
PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
Reserved SVD code 102
Unimplemented SVD code 12
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 72650000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
fbdev: 1920x1080 needs 16588800 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 193250000 pclk
fbdev: 1600x1200 needs 15360000 bytes, but only 11534336 avail.
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 67150000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
fbdev: 1920x1200 needs 18432000 bytes, but only 11534336 avail.
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 1 support
Parse_VideoData_Block: VIC 5 (native) support
Parse_VideoData_Block: VIC 7 support
Find HDMI Vendor Specific DataBlock
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=25180000 X 640 648 744 800 Y 480 482 484 525 fr 59 NN
ehci_irq: port change detect
ehci_irq: port change detect
The port change to OHCI now!
usb 2-1: new full-speed USB device number 3 using sw-ohci
input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:03F0:1024.0004: input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-sw-ohci-1/input0
ehci_irq: port change detect
ehci_irq: port change detect
The port change to OHCI now!
usb 4-1: new low-speed USB device number 4 using sw-ohci
input: Logitech USB Optical Mouse as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input5
generic-usb 0003:046D:C018.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-sw-ohci-1/input0